Alright, let me cut right to the chase here – I get tons of questions from potential clients at our AS/RS supply shop, and one that’s been popping up a lot lately is: “Can we actually integrate ASRM with our AS/RS?” First off, if you’re not super deep in the acronyms, let’s break this down quick. AS/RS is the automatic storage and retrieval system you probably already know – those high-tech rack systems with cranes shuttling pallets around warehouses, moving stuff way faster than any human could. ASRM, on the other hand, is the automated storage retrieval machine – that’s the workhorses, the robots, the shuttles, the AGVs (automated guided vehicles) you’ve seen zipping up and down aisles, grabbing totes and pallets without breaking a sweat. Automated Storage Retrieval Machine

For the longest time, folks thought of these two as separate pieces of the puzzle. Like, you’d have your AS/RS cranes handling the big bulk stuff in the racking, and then ASRMs would be off doing their own thing in picking zones or smaller areas. But lately? We’re seeing more clients ask about meshing them together. And here’s the honest answer: yeah, it’s not just possible – it’s often the best move you can make for your warehouse efficiency. Let me walk through why, how it works, the headaches you might run into, and the real-world wins we’ve seen with clients who’ve pulled this off.
First, let’s talk about why the old “keep them separate” mindset is dying. A few years back, warehouses were pretty siloed. AS/RS was for bulk storage – think 1,000-unit pallets sitting in deep racks, only pulled when a full order went out. ASRMs were for order picking, grabbing individual totes or small batches to send to packing stations. But as e-commerce blew up, and customers started demanding faster, more accurate, smaller orders, that split started causing bottlenecks. Like, say you need 5 pallets of a product from the AS/RS, but also 20 small totes of another from the ASRM. If they’re talking to each other, great – but if not? You’ve got to run around manually moving stuff between zones, which adds time, mistakes, and extra labor.
Wait, but let’s get specific about the integration part. It’s not just plugging two machines into a power strip and calling it done. The core of this is the software layer – that’s where the magic (and the gotchas) live. Most modern AS/RS systems run on a WMS (warehouse management system) or a custom control system, and ASRMs have their own on-board controllers. To tie them together, you need a unified middleware that acts like a translator. It takes data from the WMS – like “order #123 needs 3 totes of Product A, 1 pallet of Product B, and 5 small parts from bin 45” – and sends that to both the AS/RS crane and the ASRM shuttles. The AS/RS grabs the full pallet, the ASRM grabs the small parts, and they drop everything at the same packing station, lined up perfectly. No more waiting for one zone to finish before the other, no more manual transfers.
I’ll give you a real example – a client we worked with in the Midwest a year back. They were a consumer electronics distributor, running a big AS/RS for all their bulk inventory, and two separate ASRM lines for picking small parts and accessories. The problem? Their order fulfillment time was clocking in at 4 hours on average, and they had a 2% error rate because of manual transfers between the two systems. We helped them integrate the ASRMs with the AS/RS via a custom middleware, and within 3 months, their fulfillment time dropped to 90 minutes, and error rate went down to 0.3%. That’s not a fluke – that’s the power of connecting these two.
But hold on, it’s not all sunshine and robots. You’ve got to think through a few practical hurdles, especially if you’re retrofitting an existing system (vs building new from scratch). First, compatibility. A lot of older AS/RS systems (think pre-2018 models) use proprietary control software that doesn’t play nice with third-party ASRMs. We’ve had clients come to us with 10-year-old AS/RS setups, and they thought they could just add our ASRMs in, only to find out the old system’s API is locked tight. The fix here? Either work with a provider like us that can build custom adapters, or budget for a WMS upgrade if you’re planning big changes long-term.
Then there’s physical layout. AS/RS cranes operate in fixed aisles, lifting heavy pallets, while ASRMs are usually in narrower aisles or mezzanine levels, moving lighter totes. If you want them to hand off inventory, you need a transfer point that works for both. Like, a turntable that can switch from pallet dimensions (48×40 inches) to tote dimensions (12×18 inches) in seconds, or a conveyor system that syncs speeds so the AS/RS drops a pallet right where the ASRM can pick up a portion of it without jamming. We once had a client try to skip the custom transfer point and just use a standard conveyor – ended up with a pallet of monitors getting torn open because the ASRM shuttle was moving too fast to grab individual boxes. Lesson learned: don’t cut corners on the physical handoff zone.
Another big one is workload balancing. If you integrate them, you can’t have the AS/RS hoarding all the heavy pallets while the ASRMs are sitting idle. The unified middleware has to split tasks based on capacity, current load, and even time of day. Like, during peak hours (say Black Friday week), you might want the ASRMs to handle as many small, fast orders as possible, while the AS/RS handles bulk replenishment. If the workload isn’t balanced, you’ll end up with one system working overtime and the other wasting space – that’s how you end up with hidden downtime that kills your efficiency gains.
Now, let’s talk about who should actually be doing this. If you’re building a new warehouse from the ground up? Integrating ASRMs with your AS/RS from day one is way easier. You can design the layout around the handoff zones, pick AS/RS and ASRM models with open APIs, and set up the middleware before you even turn any machines on. But if you’re retrofitting an existing warehouse (like most of our clients)? It’s still doable, it just takes a bit more planning. We usually start with a free system audit – we come in, map out your current AS/RS, your ASRM setups, your order volumes, and your pain points, then lay out a plan for integration that fits your budget, not ours.
Wait, and let’s address a common myth: some people think integrating these two will require them to replace all their current equipment. No way. We’ve integrated our ASRMs with Siemens, Dematic, and even some custom-built AS/RS systems that are 15 years old. We don’t make you throw away money on new gear – we work with what you’ve got, as long as it’s in good shape. The only time we push for upgrades is when the old system is so outdated it can’t handle real-time data, which is non-negotiable for integration.
What’s the bottom line for your business? Let’s run the numbers. A typical warehouse spends 20-30% of its labor cost on manual transfers between storage and picking zones. Integrating ASRMs and AS/RS cuts that way down. Our clients usually see a 15-40% jump in overall throughput, and a 50% drop in order picking errors. For e-commerce brands that rely on fast, accurate orders, that’s not just a nice upgrade – that’s a competitive advantage.
I’ll be real with you, though – integration isn’t for every warehouse. If you’re a small business with only a few hundred pallets, and all your orders are bulk, you might not need it. The extra cost would outweigh the gains. But if you’re a mid-sized to large warehouse dealing with mixed inventory (bulk pallets + small totes) and order volumes that are growing faster than your current setup can handle? This is worth every penny.
Now, if you’re thinking, “Hey, this sounds like something we should look into,” don’t overcomplicate it. We don’t do pushy sales stuff. We just work with you to figure out what your needs are, whether integration makes sense, and what steps to take next. Maybe you’re still not sure – we can send one of our techs out to walk your current system, no obligation. No hidden fees, no long pitches.
At the end of the day, the whole point of automation is to make your life easier, not more complicated. Integrating ASRMs with your AS/RS doesn’t have to be a nightmare of coding and layout redos. It’s about connecting two great pieces of equipment to work together, so you can pick, store, and ship faster, with less mistakes and less labor.

If you want to chat more about how this could work for your warehouse, or ask any questions about compatibility, costs, or real-world examples, just reach out to our team to arrange a purchasing consultation. We’re here to help, not sell you something you don’t need.
Industrial Software References:
- Modern Materials Handling. (2022). "Integrating Automated Storage and Retrieval Systems with Robotic Picking Solutions". National Association of Wholesaler-Distributors.
- Tompkins, J. A., et al. (2021). Warehouse Automation: Design, Planning, and Implementation. 5th Edition. Wiley.
- Material Handling Industry Association. (2023). "The State of Integrated Warehouse Automation: 2023 Benchmark Report". MHI Global.
Hefei Hagong Robot Co., Ltd.
With abundant experience, we are one of the most reliable automated storage retrieval machine manufacturers and suppliers in China. Please feel free to buy durable automated storage retrieval machine made in China here from our factory. Good service and quality products are available.
Address: Building C3, 2nd Floor, Intelligent Science Park, Economic and Technological Development Zone, Hefei City, Anhui Province
E-mail: hfhg2026@126.com
WebSite: https://www.hagongrobot.com/