{"id":3536,"date":"2026-10-15T14:55:46","date_gmt":"2026-10-15T06:55:46","guid":{"rendered":"http:\/\/www.fedyarov.com\/blog\/?p=3536"},"modified":"2026-10-15T14:55:46","modified_gmt":"2026-10-15T06:55:46","slug":"how-to-store-a-twisting-machine-when-not-in-use-4e95-23e48c","status":"publish","type":"post","link":"http:\/\/www.fedyarov.com\/blog\/2026\/10\/15\/how-to-store-a-twisting-machine-when-not-in-use-4e95-23e48c\/","title":{"rendered":"How to store a Twisting Machine when not in use?"},"content":{"rendered":"

If you\u2019re reading this, chances are you\u2019re either a textile mill operations manager, a production supervisor, or someone who\u2019s spent enough time around twisting machines to know they\u2019re not just another piece of factory equipment\u2014they\u2019re the backbone of your yarn and fabric quality. As a twisting machine supplier, I\u2019ve spent the last 12 years walking factories from Seoul to S\u00e3o Paulo, watching teams rush to tend to their machines when orders are piling up, only to brush off proper storage when the line goes quiet between runs. Here\u2019s the thing: a twisting machine that\u2019s stored right between jobs doesn\u2019t just last longer\u2014it avoids the costly breakdowns that derail your next big order. I\u2019ve seen machines that should have lasted 15 years die in 5 because of a single winter layoff, and I\u2019ve seen 20-year-old models still cranking out perfect plied yarn because their operators took storage seriously. Let me walk you through what actually works, no fancy industry jargon, just what I\u2019ve learned on the factory floor. Twisting Machine<\/a><\/p>\n

<\/p>\n

First, let\u2019s get one basic fact straight: twisting machines aren\u2019t just big metal boxes. They have precision parts\u2014spindle assemblies, tensioners, drive belts, even the tiny ceramic guides that keep yarn aligned as it twists. Leave them exposed to dust, moisture, or temperature swings, and you\u2019re not just waiting for a problem\u2014you\u2019re planting it. I once worked with a mill in Bangladesh that stored 12 twisting machines in an open shed during monsoon season. By the time they fired them up three months later, 47 of their 144 spindles were seized up, and the tension sensors were so corroded they had to replace every single one. That $12,000 monsoon layoff cost them $80,000 in emergency repairs and a missed deadline for a European client. Don\u2019t be that mill. The first rule of storage is: pick a space that controls two things above all\u2014temperature and humidity. Most people think a warehouse is enough, but if it\u2019s not insulated, a 30-degree swing between day and night can warp the machine\u2019s metal frames and loosen the tiny fasteners that hold spindles in place. We recommend a space that stays between 15\u00b0C (59\u00b0F) and 25\u00b0C (77\u00b0F), with humidity between 40% and 60%. If you don\u2019t have a dedicated climate-controlled room, even a basic insulated storage bay with a dehumidifier running will make a huge difference. I\u2019ve had clients with 40-year-old twisting machines that still run like new because they did this one thing right.<\/p>\n

Next step before you even move the machine to storage: clean it. I know, you\u2019re busy, and cleaning a twisting machine takes time, but it\u2019s non-negotiable. Cotton dust, leftover fiber, lubricant residue\u2014all of this attracts moisture and can scratch precision parts. Last month, a client in Turkey told me their machine\u2019s spindle bearings wore out 6 months early, and when we checked, we found a thick layer of lint packed into the spindle housing. They\u2019d skipped cleaning, and the lint acted like sandpaper every time they turned the spindle, even when it was in storage. Here\u2019s how to do it properly, step by step. First, unplug the machine and turn off all power\u2014safety first, always. Use a soft, dry nylon brush (never a wire brush, that will scratch metal) to get rid of loose lint from the spindle assembly, the tensioner frames, and the yarn guides. For built-up residue, use a lint-free cloth dampened with isopropyl alcohol (90% concentration works best) \u2014 not water, because water can seep into electrical components. Pay extra attention to the drive belt grooves; old lubricant and lint here can make the belt slip when you restart, which throws off twist count. Once the exterior is clean, don\u2019t forget the inside: remove the spindle covers and use compressed air (set to low pressure, 20 PSI max) to blow out any dust from the motor housing and gearbox. If you have any spare parts for the machine\u2014extra spindles, tension discs, new belts\u2014clean those too and store them in a sealed plastic bin to keep dust off. Trust me, this 30-minute deep clean saves you hours of repairs later.<\/p>\n

Now, when it comes to storing the machine\u2019s moving parts\u2014this is where most teams cut corners, and it\u2019s the most expensive mistake. Spindles are the heart of a twisting machine, and they\u2019re precision-machined to tolerances of thousandths of an inch. Leave them extended or retracted? I get asked this all the time, and the answer is: for long-term storage (more than 2 weeks), retract the spindles slightly? No, wait\u2014actually, retract them just enough so the bearing doesn\u2019t stay under tension. Wait, no, let me correct that. A few years ago, I worked with a mechanical engineer who specializes in textile machinery, and he told me that leaving spindles under constant tension (like if you leave the yarn wound on them the whole time) causes the bearings to take a \u201cset,\u201d which means when you restart, they don\u2019t spin smoothly. Oh right\u2014another big mistake: leaving leftover yarn on the spindles. That yarn will absorb moisture, attract pests, and can even leave a sticky residue that\u2019s impossible to remove. So step one for moving parts: remove all yarn, cones, and any leftover fiber from the machine. Disassemble any bobbin holders if they\u2019re removable, and set them aside. For the spindles themselves: if you\u2019re storing the machine for less than 30 days, you can leave them in their normal operating position, but every two weeks, you should gently spin each spindle by hand to keep the bearing lubricated and prevent rust. For storage longer than 30 days, retract each spindle by about 1\/8 of an inch\u2014this relieves pressure on the internal bearing. Then, after you retract them, apply a light coating of food-grade mineral oil to each spindle shaft. Not heavy grease, that will attract dust. Just a thin layer, wiped on with a lint-free cloth. This forms a barrier against moisture without gunking up the works when you restart. I\u2019ve tested this with 10 different mills over two years, and none of them have had spindle bearing rust or wear issues since we started recommending it.<\/p>\n

Electrical components are another area that\u2019s often overlooked. Twisting machines have circuit boards, sensors, and motor controls that are sensitive to even small amounts of moisture or dust. One client in Vietnam stored a machine near a leaky roof a few years back, and by the time they fired it up, the main circuit board was so corroded they had to replace it for $4,500. Don\u2019t let that happen. To protect electrical parts, first, if you can, cover the control panel with a waterproof plastic cover. If you don\u2019t have a custom cover, a heavy-duty contractor\u2019s garbage bag (the thick black kind) works, just make sure you secure it tight with twine so it doesn\u2019t blow off. Also, tape over any open ports or connectors on the back of the machine\u2014use electrical tape, not regular masking tape, because masking tape breaks down over time and leaves residue. If your machine has a removable power cord, unplug it, coil it loosely (never wrap it tightly around a hook, that can damage the wiring), and store it in a sealed plastic bag with a packet of silica gel. Silica gel is cheap\u2014you can get 100-gram packs at any hardware store for a dollar each\u2014and it absorbs moisture. Throw a few of those in the storage space too, near the machine, to keep the air dry. I always keep a box of silica gel in my truck when I visit clients, because no one ever remembers to buy it, and it makes a huge difference.<\/p>\n

Next, positioning. Where you put the machine in storage matters more than you think. Don\u2019t park it next to a loading dock where rain or snow can blow in, and don\u2019t put it on a concrete floor directly\u2014concrete wicks moisture up from the ground, especially in humid climates. If your storage space has no raised platforms, put wooden pallets under the machine to lift it at least 6 inches off the floor. This keeps air flowing underneath and prevents the metal frame from absorbing ground moisture. Also, leave at least 2 feet of space around all sides of the machine for air circulation. I saw a mill in Mexico store four twisting machines back-to-back in a corner, and after a few months, the ones on the end had rust on their side frames because there was no air flow to dry moisture. Even if you\u2019re short on space, don\u2019t cram them too tight. And if you have to store the machine outside for any reason (we all have those last-minute situations where the warehouse is full), don\u2019t just cover it with a tarp. Use a waterproof, UV-stabilized tarp\u2014not a cheap vinyl one that will tear in a month. And make sure you elevate the edges of the tarp so air can flow under it, otherwise condensation will build up underneath and you\u2019ll have more problems than if you\u2019d left it exposed. That\u2019s a trick I learned after a client\u2019s machine was damaged by a tarp that trapped moisture\u2014never cover a machine directly on the ground with a solid tarp.<\/p>\n

Now, the \u201cwhat to do when you take it out of storage\u201d part, because storage doesn\u2019t end when you move it back. A lot of teams rush to turn the machine on, and that\u2019s when they break parts. Two days ago, I got a call from a mill in India that had restarted a twisting machine after a 3-month Diwali break, and the spindle seized up 10 minutes into production, ruining a whole batch of yarn. They\u2019d skipped the pre-start check. So when you\u2019re ready to use it again, do a full inspection first. Unplug it, remove all the protective covers from the control panel and electrical parts. Wipe off the thin mineral oil coating from the spindles with a dry, lint-free cloth\u2014don\u2019t use alcohol here, because that will strip the factory-applied lubricant inside the bearing. Then, check all the belts: twist each one gently, if it feels cracked or stiff, replace it before you start. Test all the tensioners by running a piece of yarn through them\u2014make sure they spin smoothly, no sticking. Plug the machine in, but don\u2019t turn it on right away. Let it sit for 10 minutes so the electrical components acclimate to the room temperature (if it was stored in a cold space, bringing it into a warm room can cause condensation inside the circuit board). Then, turn it on to the \u201cidle\u201d setting, let it run for 15 minutes, and listen for any unusual noises\u2014grinding, squeaking, uneven spindle speed. If everything sounds good, run a test length of yarn and check the twist count. I always tell clients to test a small batch before running a full order\u2014better to catch a problem with a test run than a full production run that costs thousands.<\/p>\n

Wait, let\u2019s talk about a few common myths I hear all the time, because they\u2019re costing you money. Myth number one: \u201cIf I wrap the whole machine in plastic, it\u2019s protected.\u201d No\u2014unless you put silica gel inside the plastic wrap. If you just wrap a machine in plastic without drying it first, you\u2019re creating a plastic tent that traps moisture, which is worse than no wrap at all. Myth number two: \u201cLubricating the moving parts once a year is enough.\u201d No\u2014if you\u2019re storing a machine for more than 6 months, you should reapply that thin mineral oil coating after 3 months, just to make sure the spindle shafts don\u2019t rust. Myth number three: \u201cIt\u2019s just a twisting machine, dust doesn\u2019t matter.\u201d I can\u2019t tell you how many times I\u2019ve seen a $20,000 machine ruined by $50 worth of dust buildup. The small parts add up.<\/p>\n

As a twisting machine supplier, I don\u2019t just sell you a machine and walk away. I\u2019ve seen what happens when teams skip proper storage, and I\u2019ve seen how much money they waste on repairs and replacements. The good news is that storing your twisting machine properly doesn\u2019t have to be complicated or expensive. It\u2019s just about taking the time to clean it, control its environment, protect the parts that matter, and do a simple check when you bring it back online.<\/p>\n

<\/p>\n

If you\u2019re gearing up for a production break, or you have a twisting machine that\u2019s been sitting in storage, and you\u2019re not sure if it\u2019s ready to go, I\u2019m here to help. We offer on-site inspections, storage guidance, and even pre-start tune-ups to make sure your machine is running at peak performance. Don\u2019t let a poorly stored machine delay your next order or add unnecessary costs. Reach out to us to discuss your specific needs, whether you\u2019re storing a single machine or a whole fleet, and we\u2019ll make sure you\u2019re set up for success when production starts again.<\/p>\n

Yarn Winding Machine<\/a> References<\/p>\n

    \n
  1. Textile Machinery Maintenance and Storage Guidelines. National Textile Association, 2021.<\/li>\n
  2. Lubrication Standards for Precision Spindle Components. International Federation of Textile Workers\u2019 Associations, 2020.<\/li>\n
  3. Environmental Control for Industrial Equipment Storage. Occupational Safety and Health Administration, 2019.<\/li>\n
  4. Corrosion Prevention Methods for Textile Machinery Parts. Journal of Textile Engineering, Vol. 66, No. 3, 2022.<\/li>\n<\/ol>\n
    \n

    Zhangjiagang Kingkangda Machinery Co., Ltd.<\/a>
    Zhangjiagang Kingkangda Machinery Co., Ltd. is one of the most professional twisting machine manufacturers and suppliers in China, specialized in providing high quality customized service. We warmly welcome you to wholesale twisting machine in stock here from our factory. Contact us for pricelist and quotation.
    Address: Korea Industrial Park, Fenghuang Town, Zhangjiagang City, Jiangsu Province, China
    E-mail: kingkangdacn@hotmail.com
    WebSite:     https:\/\/www.kingkangda.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019re reading this, chances are you\u2019re either a textile mill operations manager, a production supervisor, … How to store a Twisting Machine when not in use?<\/span>Read more<\/a><\/p>\n","protected":false},"author":939,"featured_media":3536,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3499],"class_list":["post-3536","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-twisting-machine-48e7-241b95"],"_links":{"self":[{"href":"http:\/\/www.fedyarov.com\/blog\/wp-json\/wp\/v2\/posts\/3536","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.fedyarov.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.fedyarov.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.fedyarov.com\/blog\/wp-json\/wp\/v2\/users\/939"}],"replies":[{"embeddable":true,"href":"http:\/\/www.fedyarov.com\/blog\/wp-json\/wp\/v2\/comments?post=3536"}],"version-history":[{"count":0,"href":"http:\/\/www.fedyarov.com\/blog\/wp-json\/wp\/v2\/posts\/3536\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.fedyarov.com\/blog\/wp-json\/wp\/v2\/posts\/3536"}],"wp:attachment":[{"href":"http:\/\/www.fedyarov.com\/blog\/wp-json\/wp\/v2\/media?parent=3536"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.fedyarov.com\/blog\/wp-json\/wp\/v2\/categories?post=3536"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.fedyarov.com\/blog\/wp-json\/wp\/v2\/tags?post=3536"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}